Yealink VC880 - Virtual Meeting Room (VMR); Joining a VMR by Remote Control; Joining a VMR by CP960; Joining a Virtual Meeting Room by Dialing

| Using the Yealink VC Cloud Management Service Platform | 49
Virtual Meeting Room (VMR)
The VMR is created by the Yealink Cloud enterprise administrator on the Yealink VC Cloud management service
platform, so that the Yealink Cloud user can call into the VMR to initiate video conferences at any time. For more
information, refer to Yealink VC Cloud Management Service User Guide.
•
Joining a VMR by Remote Control
•
Joining a VMR by CP960
•
Joining a Virtual Meeting Room by Dialing
Joining a VMR by Remote Control
Procedure
1.
On your remote control, go to Dial > Directory.
2.
Select Cloud from the drop-down menu.
3.
Select VMR.
4.
Select the desired VMR.
5.
Press OK key to place a video call.
If you want to place a voice call, press the right key to select Voice Call.
Joining a VMR by CP960
Procedure
1.
On your CP960, tap Directory.
2.
Select Cloud from the drop-down menu.
3.
Tap VMR.
4.
Tap the desired VMR to place a video call.
If you want to place a voice call, tap beside the desired VMR and then tap Voice Call.
Joining a Virtual Meeting Room by Dialing
Procedure
Do one of the following:
• If you register a Yealink Cloud account, dial the conference ID to join the conference.