Yealink VC880 - CPN10 PSTN Box Usage; VCC22 Video Conferencing Cameras

| Accessories with Your System | 102
Viewing the Information of CPW90-BT Bluetooth Wireless Microphones by Remote
Control
Procedure
1.
On your remote control, go to More > Status > Wireless Microphone.
2.
Select the desired wireless microphone.
Viewing the Information of CPW90-BT Bluetooth Wireless Microphones by CTP20
Procedure
On your CP960, tap Setting > Wireless Microphone.
Using the CPN10 PSTN Box
It is a cost-effective solution for PSTN office. Up to 2 cascaded PSTN Boxes can be installed to video conferencing
systems, which allow you to experience the conference conveniently in excellent speech quality with PSTN. For more
information, refer to Yealink PSTN Box CPN10 Quick Start Guide. Up to two PSTN accounts can be registered on
the system, with one-way audio call for one account. You can call PSTN users, receive the call from PSTN users, or
create a conference with the PSTN user.
Using the VCC22 Video Conferencing Cameras
You can connect up to 9 VCC22 video conferencing cameras to the VC880/PVT980 video conferencing system. You
can connect up to 8 VCC22 video conferencing cameras to the VC800 video conferencing system. VCC22 video
conferencing cameras are not applicable to VC500/VC200/PVT950 video conferencing endpoint.
Note:
Before using the VCC22 Video Conferencing Cameras, you should read the Yealink VCC22 Video
Conferencing Camera Quick Start Guide to know the package and installation.
•
Controlling VCC22 Camera
•
Camera Layout
•
Controlling Multiple Remote Cameras
•
Layouts of Multiple Monitors
•
Resetting the Camera
Controlling VCC22 Camera
When the system is idle and VCC22 is connected to the system, the connected cameras will appear on the right side of
idle screen. You can select a desired video image of the camera to be displayed on the system, and adjust the camera
angle and focal length.
•
Controlling VCC22 Camera by Remote Control
•
Controlling VCC22 Camera by CP960