| Using Basic Features | 83
Recording Local Videos by CP960
Procedure
1.
On your CP960, tap to start recording.
If your system administrator enables the server recording permission for your YMS account, select Local
recording.
The touch screen prompts “Recording”.
2.
Tap to stop recording.
Recording Local Videos by WPP20
Before you begin
Make sure the computer is powered on and you connect the WPP20 wireless presentation pod to your computer.
Procedure
1.
Do one of the following:
• When the system is idle, click Start Sharing on the Yealink Wireless Presentation Pod software.
• When the system is during the call, click Start Sharing or Meeting Control > Recordon the Yealink Wireless
Presentation Pod software.
2.
Select the storage location for the recording file.
The system prompts whether or not you agree with the recording request.
3.
Confirm the WPP20 recording request on the system.
4.
On the Yealink Wireless Presentation Pod software, click Stop Sharing.
Recording Server Videos
If the administrator has enabled server recording permission for your YMS account, you can choose to record the
video on the server when you initiate a meeting or join a meeting that has been assigned recording permission.
•
Recording Server Videos by Remote control
•
Recording Server Videos by CP960
•
Recording Server Videos by CTP20
Recording Server Videos by Remote control
Before you begin
You are the initiator of a Meet Now conference or a participant who is given permission to record.
To Next Page
Loading...
