Yealink VC880 - Allowing the Remote System to Control Your Camera

| Settings | 97
Adjusting Cameras When not in a Call by CP960
Procedure
1.
On your CP960, tap Camera during a conference.
2.
Tap the navigation keys to adjust the camera angle.
3.
Press or to adjust the focal length.
Adjusting Cameras in a Call by Remote Control
Procedure
1.
On your remote control, press OK key to open Talk Menu.
2.
Select Near/Far Camera and then press the right key to select the desired camera.
3.
Tap the navigation keys to adjust the camera angle.
4.
Tap or to adjust the focal length.
Controlling Cameras by CP960 during a Call
Procedure
1.
On your CP960, tap More > Camera Control > The current control camera in a conference.
2.
Select the desired camera.
3.
Tap to return.
4.
Tap the navigation keys to adjust the camera angle.
5.
Tap or to adjust the focal length.
Allowing the Remote System to Control Your Camera
You can allow the remote system to control the angle and the focal length of your camera.
•
Enabling Far Control Near Camera by Remote Control
Enabling Far Control Near Camera by Remote Control
Procedure
1.
On your remote control, go to More > Setting > Video & Audio.
2.
Enable Far Control Near Camera.