Yealink VC880 - Joining a VMR from Directory; Joining a VMR by Dialing

| Using Yealink Meeting Server | 63
•
Joining a VMR by Dialing
Joining a VMR from Directory
•
Joining a VMR by Remote Control
•
Joining a VMR by CP960
Joining a VMR by Remote Control
Procedure
1.
On your remote control, go to Dial > Directory.
2.
Select Enterprise directory from the drop-down menu.
3.
Select VMR.
4.
Select the desired VMR.
5.
Press OK key to place a video call.
If you want to place a voice call, press the right key to select Voice Call.
Joining a VMR by CP960
Procedure
1.
On your CP960, tap Directory.
2.
Select Enterprise directory from the drop-down menu.
3.
Tap VMR.
4.
Tap the desired VMR to place a video call.
If you want to place a voice call, tap beside the desired VMR and then tap Voice Call.
Joining a VMR by Dialing
Procedure
Do one of the following:
• If you register a YMS account, dial the conference ID to join the conference.
• If you do not register a YMS account and the VMR requires no password:
• For SIP devices, dial conference ID** @server address or server address##conference ID to join the
conference.
• For H.323 devices, dial the server IP address##conference ID to join the conference.