Yealink VC880 - Initiating a Conference by Inviting Contacts

| Managing the Local Video Conference | 42
Initiating a Conference by Inviting Contacts
You can invite contacts during a call to initiate a conference.
•
Inviting Participants by Remote Control
•
Inviting Participants by CP960
Inviting Participants by Remote Control
Procedure
1.
On your remote control, press OK key to open Talk Menu during a call.
2.
Select Invite.
3.
Do one of the following:
• Select Dial, enter a phone number, and then dial out.
• Select Directory, select a desired contact, and then dial out.
• Select Group Dial, press the right key to select a desired contact group, check the desired contacts’
checkboxes, and then press the right key to select Start conference call.
• Select History, select the desired history record, and then dial out.
4.
Repeat the above steps until all the desired participants are added.
Note: You can press Dial key to go to the pre-dialing screen during a call.
Inviting Participants by CP960
Procedure
1.
On your CP960, tap Invite during a call.
2.
Do one of the following:
•
If you tap , enter a phone number and then tap Invite.
•
If you tap , tap a desired contact to dial out.
•
If you tap , tap the desired call history to dial out.
•
Tap Call multiple members? Click here. select the desired contacts you want to call, and then tap .
3.
Repeat the above steps until all the desired participants are added.