| Settings | 91
Configuring Video Settings
You can configure video settings on the system.
•
Maximizing Monitor Video Display
•
Allowing Website Snapshot
•
Video Input Source
•
Changing the Screen Layout
Maximizing Monitor Video Display
Your monitor may not display the entire HD image. To solve this problem, you can scale the monitor to display the
entire HD image manually.
•
Maximizing Monitor Video Display by Remote Control
Maximizing Monitor Video Display by Remote Control
Procedure
1.
On your remote control, go to More > Setting > Basic > Display.
2.
Use left or right key to adjust the Display (90%-100%) slider.
3.
Select Save and then press OK key to accept the change.
Allowing Website Snapshot
You can enable the Website Snapshot feature, so that the image on the monitor can be synchronized to the web user
interface. If you do not want others to view the image displayed on your monitor, you can disable this feature.
•
Allowing Website Snapshot by Remote Control
Allowing Website Snapshot by Remote Control
Procedure
1.
On your remote control, go to More > Setting > Basic.
2.
Enable Website Snapshot.
3.
Select Save and then press OK key to accept the change.
Video Input Source
The system supports the video input sources both from the camera and the PC.
•
Changing the Video Input Source When not in a Call
•
Changing the Video Input Source in a Call
Changing the Video Input Source When not in a Call
Before you begin
To use the PC input source, make sure that your system is connected to a PC.
To Next Page
Loading...
