Yealink VC880 - Stopping Sharing Content When Not in a Call; Sharing Content in a Call

| Presenting | 72
Procedure
The system will connect to the wired sharing and display the sharing content automatically. If the system does not
start sharing content automatically, do one of the following to start sharing content manually:
•
If on your remote control is set as Presentation key by your system administrator, press to start
sharing content.
• On your CP960, tap Presentation to start sharing content.
Stopping Sharing Content When not in a Call
Procedure
Do one of the following:
• Disconnect the computer from your system.
•
If on your remote control is set as Presentation key by your system administrator, Press to stop
sharing content.
• On your CP960, tap Presentation to stop sharing content.
Sharing Content in a Call
You can share content from a computer when your system is in a call.
Before you begin
Make sure the computer is powered on and connected to your system.
Procedure
Generally, the system will connect to the wired sharing and display the sharing content automatically. If the
system does not display the sharing content automatically, do one of the following to start sharing content
manually:
•
If on your remote control is set as Presentation key by your system administrator, press to start
sharing content.
• On your remote control, press OK key to open Talk Menu, and then select Presentation.
• On your CP960, tap Presentation to start sharing content.
Note: In the audio call, only the local monitor can display the sharing content. In the video call, both the
local and the remote monitor can display the sharing content.