Yealink VC880 - Blocking or Unblocking Audio on CTP20; Enabling or Disabling the Camera on the CTP20; Controlling Cameras by CTP20

| Using Yealink Meeting Server | 68
Blocking or Unblocking Audio on CTP20
The moderator can block/unblock audio of any participant to control whether the participant can hear the voice in the
meeting.
Procedure
1.
In the Conference Control page, tap Participant.
2.
Tap after the desired participant, select Block Audio/Unblock Audio.
Enabling or Disabling the Camera on the CTP20
The moderator can enable or disable the participant's camera to control whether other participants can see the video of
the participant.
Procedure
1.
In the Conference Control page, tap Participant.
2.
Tap / after the desired participant to disable/enable the camera.
Controlling Cameras by CTP20
The moderator can control the camera of the participants, including: moving up and down, moving left and right, and
zooming in/out.
Before you begin
Make sure that the camera you want to control is not turned off and the Far Control Near Camera feature is enabled.
Procedure
1.
In the Conference Control page, tap Participant.
2.
Tap after the desired participant, select Camera Control.
3.
Tap the navigation keys to adjust the camera angle.
4.
Tap or to adjust the focal length.
Related tasks
Disabling or Enabling the Camera on CTP20
Allowing the Remote System to Control Your Camera