Yealink VC880 - Inviting Conference Participants; Removing Conference Participants

| Using Yealink Meeting Server | 66
Inviting Conference Participants
During the YMS video conference, any participants can invite other YMS contacts to join the conference.
•
Inviting Conference Participants by Remote Control
•
Inviting Conference Participants by CP960
Inviting Conference Participants by Remote Control
During the YMS video conference, any participants can invite other YMS contacts to join the conference.
Procedure
1.
On your remote control, press OK key to open Talk Menu during a call.
2.
Select Invite.
3.
Do one of the following:
• If you select Dial, enter a YMS account, and then dial out.
• If you select Group Dial, select the desired department and select the desired YMS contacts, and then press
the right key to select Start conference call.
4.
Repeat above steps until all the desired participants are added.
Inviting Conference Participants by CP960
Procedure
1.
On your CP960, tap New Call.
2.
Do one of the following:
•
If you tap , select the desired department, tap the desired YMS contacts, and then tap to dial out.
•
If you tap , enter a YMS account, tap Add members, repeat this step to add more participants and tap to
dial out.
Removing Conference Participants
You can remove conference participants if you are the organizer/moderator of a YMS video conference.
•
Removing Conference Participants by Remote Control
•
Removing Conference Participants by CP960
Removing Conference Participants by Remote Control
Procedure
1.
On your remote control, press OK key to open Talk Menu during a call.