Yealink VC880 - Do Not Disturb (DND) Feature

| Operating Calls | 39
DND (Do Not Disturb)
You can enable DND feature to reject incoming calls automatically. All the rejected calls will be recorded to the
missed call list. To prevent callers from interrupting the active call, you can enable DND during an active call. The
DND feature will be disabled automatically after the call ends.
•
Enabling DND When Not in a Call by Remote Control
•
Enabling DND When Not in a Call by CP960
•
Enabling DND in a Call by Remote Control
•
Enabling DND in a Call by CP960
Enabling DND When Not in a Call by Remote Control
If you do not have conferences to attend, you can enable DND.
Procedure
1.
On your remote control, go to More > Setting > Call Features.
2.
Enable DND.
The icon will appear in the status bar of monitor, and “Do not disturb now!” will be prompted at intervals.
Enabling DND When Not in a Call by CP960
Procedure
1.
On your CP960, swipe down from the top of the screen to enter the control center.
2.
Tap DND.
If the DND feature is enabled, the touch screen prompts “ DND mode is enabled”. The phone will
automatically reject the incoming calls and send the busy tones. The prompt “N New Missed Call(s)” is displayed
on the touch screen.
Enabling DND in a Call by Remote Control
Procedure
1.
On your remote control, press OK key to open Talk Menu during a call.
2.
Select DND.
The icon will appear in the status bar of the monitor, and “Do not disturb now!” will be prompted at intervals.