Yealink VC880 - Muting the Microphone

| Settings | 90
•
Enabling Silent Mode by CP960
Enabling Silent Mode by Remote Control
Procedure
On your remote control, do one of the following:
• Long press Vol- key to decrease the volume to the minimum.
•
If is set as Mute Speaker key by your system administrator. On your remote control, press .
Note: When the silent mode is enabled, the icon will appear on the monitor.
Related tasks
Enabling Silent Mode by CP960
Enabling Silent Mode by CP960
Procedure
On your CP960, do one of the following:
• Long tap the left volume touch key to decrease the ringer volume to minimum.
• Swipe down from the top of the screen to go to the control center and tap Silent.
Note: When the silent mode is enabled, the icon will appear on the CP960’s touch screen.
Muting the Microphone
You can mute the local microphone during a call, so that other parties cannot hear you.
Procedure
Do one of the following:
• On your remote control, press Mute Key.
• On your CP960, tap one of the Mute keys.
• On your CP960’s touch screen, tap Mute.
• On your CPE90 wired expansion microphones, tap the Mute key.
• On your CPW90-BT Bluetooth wireless microphones, tap the Mute key.
If video conferencing system is muted, the icon will appear on the local video.