9-7
IM 04L20A01-01E
Operations of Other Functions
9
4. Enter the password using the soft keys and arrow keys, then press the DISP/
ENTER key.
If the password is correct, the user is logged in, and the user name appears in
the status indication section as shown below.
User name
Logging out
• Manual logout
1. In operation mode, press the FUNC key.
A soft key menu is displayed at the bottom of the display
2. Press the [Logout] soft key.
The user name in the status indication section disappears.
• Auto logout
If the auto logout function is enabled, users are automatically logged out when there is
no key operation for 10 minutes in operation mode or setting mode.
Explanation
Logging In/Logging Out
• When logged out, only the login operation can be accessed.
• If the FX100 is switched from basic setting mode to operation mode, the FX100 is in a
logged out condition.
• When the power is turned OFF and turned ON again, the FX100 starts in the logged
out condition.
• The records of key login/logout can be viewed on the log screen. See section 9.4.
Saving the User Name
When starting/stopping the acquisition of the display data/event data to the internal
memory, the user name is written to the respective files. The user name when writing
messages is also written to the internal memory.
9.3 Using Key Login/Logout Function
To Next Page
Loading...
Need help?
General
