9-6 IM 04L20A01-01E
• Number
Select the user registration number from [1] to [7].
• Off/On
Select whether to enable [On] or disable [Off] the key login function of the user
corresponding to the registration number.
• User name
Enter the user name using up to 16 alphanumeric characters. You cannot specify
“quit” as a user name. In addition, the user name cannot be set to all spaces. If the
user name already exists, a message “This username is already registered.” appears.
In this case, change the user name to a unique name.
• User ID (only when UserID Use/Not is set to [Use])
Enter the user ID using up to 4 alphanumeric characters.
• Password
Set the password using up to 6 alphanumeric characters.
• Enter setup
Select whether to allow the user that has logged in to enter basic setting mode
([Enable]) or not ([Disable]).
Note
You cannot set all users to [Disable]. If you attempt to do so, the user with the smallest
registration number is automatically changed to [Enable] at the time the setup data is saved.
Logging In, Logging Out <Operation Mode>
Procedure
Logging in
1. In operation mode, press the FUNC key.
A user name list window and a soft key menu appears.
2. Press the soft key corresponding to the user to be logged in.
If [UserID Use/Not] is set to [Use] in the key login settings, a User ID entry pop-
up window appears. Proceed to step 3. If it is set to [Not], proceed to step 4.
3. Enter the User ID using the soft keys and arrow keys, then press the DISP/
ENTER key.
A password entry pop-up window appears.
9.3 Using Key Login/Logout Function
To Next Page
Loading...
Need help?
General
