3-16 IM 04L20A01-01E
3.7 Changing the Time Zone
This section explains how to set the time difference with respect to Greenwich Mean
Time. Make sure to set this value if you are using the Web server function.
Time Zone <Basic Setting Mode>
Procedure
Opening the Setting Display
MENU key (switch to setting mode) > Hold down the FUNC key for 3 seconds
(switch to basic setting mode) > #5 soft key (select [Aux, Time zone])
From the operation mode, use the above keys to open the following setting display.
Setup Procedure
1. Use the arrow keys to move the cursor (blue) to the [Difference from GMT] box
under [Time zone].
[Input] is displayed at the bottom of the display.
2. Press the [Input] soft key.
The pop-up window appears.
3. Enter the time difference using the left and right arrow keys to move the
cursor (blue), the up and down arrow keys to select a number.
4. Press the DISP/ENTER key.
The pop-up window disappears and the time difference is set.
To cancel the settings and clear the pop-up window, press the ESC key.
5. Press the DISP/ENTER key to confirm the changes.
Saving the Settings
1. Press the ESC key.
The display returns to basic setting menu.
2. Press the [End] soft key.
A confirmation window appears.
3. Select [Yes] and press the DISP/ENTER key.
The operation screen is displayed.
Setup Items
Time Zone
Set the time difference with respect to Greenwich Mean Time from −1200 to 1200 (the
upper two digits indicate the hour; the lower two digits indicate the minute). The initial
value is set to “0.”
Example: The standard time in Japan is ahead of the Greenwich Mean Time by 9
hours. In this case, enter “900.”
To Next Page
Loading...
Need help?
General
