12-13
IM 04L20A01-01E
Specifications
12
12.6 General Specifications
Construction
Item Specifications
Mounting Flush panel mounting (on a vertical plane)
Tilt Mounting may be inclined backward up to 30 degrees from a horizontal plane.
Allowable panel thickness 2 to 26 mm
Material Case: drawn steel
Bezel: polycarbonate
Case color Case: Grayish blue green (Munsell 2.0B 5.0/1.7 or equivalent)
Bezel: Charcoal grey light (Munsell 10B 3.6/0.3 or equivalent)
Front panel Water and dust-proof (based on IEC529-IP65)
Dimensions 144(W) × 144(H) × 234(D) mm
Weight Models without storage drive: approx. 2.2 kg
Models with FDD: approx. 2.5 kg
Models with CF memory card slot: approx. 2.3 kg
Normal Operating Conditions
Item Specifications
Ambient temperature 0 to 50°C (when using FDD: 0 to 40°C)
Ambient humidity 20% to 80% RH (at 0 to 40°C), 10% to 50% RH (at 40 to 50°C)
Power supply voltage 90 to 132 or 180 to 250 VAC
Power supply frequency 50 Hz ±2%, 60 Hz ±2%
Vibration 10 to 60 Hz, 0.2 m/s
2
or less
Shock Not acceptable
Magnetic field 400 A/m or less (DC and 50/60 Hz)
Noise Normal mode (50/60 Hz):
Volt: The peak value including the signal must be less than 1.2 times the measuring range.
DI (level): The peak value including the signal must be less than 1.2 times the measuring range.
TC: The peak value including the signal must be less than 1.2 times the measuring thermal
electromotive force.
RTD: The peak value must be 100 mV or less.
Common mode noise (50/60 Hz): 250 Vrms AC or less for all ranges
Maximum noise voltage between channels (50/60 Hz): 250 VACrms or less
Mounting position Can be inclined up to 30 deg backward. Mounting at an angle away from the perpendicular is not
acceptable.
Warm-up time At least 30 minutes after power on
Altitude 2000 m or less above sea level
Measurement category II (EN61010-1)
Installation category II (CSA1010-1)
Pollution degree 2
Power Supply
Item Specifications
Rated power supply 100 to 240 VAC
Allowable power supply voltage range
90 to 132 or 180 to 264 VAC
Rated power supply frequency
50/60 Hz
Rated Power consumption 35 VA
Power consumption Power supply LCD backlight saver ON Power consumption (maximum)
100 VAC 10 VA 14 VA (25 VA)
240 VAC 18 VA 22 VA (35 VA)
To Next Page
Loading...
Need help?
General
