1-22
IM 04P03B01-01E
For the procedure to set the functions, see section 1.6, “Function Setup Guide.”
1.5 Other Functions
DST
If the recorder is used in a region that has DST, time can be switched automatically
between DST and standard time by setting the date/time when switching from the
standard time to DST and the date/time when switching back from DST to standard time.
When switching from standard time to DST, the clock is set ahead by 1 hour. When
switching back from DST to standard time, the clock is set back by 1 hour.
<Related Topics> Using the DST: Section 3.14
Temperature Unit
The temperature unit can be set to Celsius or Fahrenheit. The setting applies to all
channels.
<Related Topics> Changing the temperature unit: Section 4.24
To Next Page
Loading...
