YOKOGAWA SR10000 series User Manual

4-12
IM 04P03B01-01E
4.9 Setting the Key Lock
The keys that can be locked and the password for releasing the key lock can be set.
Basic Setting mode cannot be entered when recording is in progress.
Procedure
1. Hold down the
MENU
key for 3 seconds to enter Setting mode.
2. Hold down the and keys simultaneously for 3 seconds to display the
Basic Setting mode screen.
3. Carry out the procedure shown in the figure below.
Press the
or key to select the value.
For the procedure on how to enter values or characters, see page 19 in the
Operation Guide .
If you press the key, the operation is cancelled, and the display returns to a
higher level menu.
Select “LOCK.”
(LOCK)
(USE)
(****)
(RCd)
(FREE)
(FEED)
(FREE)
(MENU)
RCD key
Select whether to lock the key
(LOCK or FREE).
FEED key
Select whether to lock the key
(LOCK or FREE).
(FREE)
MENU key
Select whether to lock the key
(LOCK or FREE).
(M_PRN)
(FREE)
Manual printout
Select whether to lock the key
(LOCK or FREE).
To the next page
Select "USE" to set the target keys of the
key lock.
(Displays the following when the target
key setting is set to USE)
Set the password.

YOKOGAWA SR10000 series Specifications

General

Brand	YOKOGAWA
Model	SR10000 series
Category	Measuring Instruments
Language	English