3-20
IM 04P03B01-01E
3.14 Setting the Date/Time for Switching between
Standard Time and DST
The date/time for switching from the standard time to DST and the date/time for
switching back from DST to standard time can be set, if the recorder is used in a region
that has DST. When the preset date/time arrives, the recorder internal clock
automatically switches.
Procedure
1. Hold down the
MENU
key for 3 seconds to enter Setting mode.
2. Carry out the procedure shown in the figure below.
Press the
or key to select the value.
If you press the key, the operation is cancelled, and the display returns to a
higher level menu.
Select whether to use the DST function.
Select “DST.”
(Displays the following when the
DST function is set to USE)
Select the start month.
Select the “AUX.”
(AUX)
(DST)
(USE)
Select the start week.
Select the start day.
(LAST)
(SUN)
Select the start hour.
(LAST)
(SUN)
The settings are activated.
(OK)
Start month
Start week
Start day
Start hour
Select the end month.
Select the end week.
Select the end day.
Select the end hour.
End month
End week
End day
End hour
To Next Page
Loading...
Need help?
General
