4-31
IM 04P03B01-01E
Setup Operations for Changing/Adding Functions (Basic Setting Mode)
4
4.21 Enabling/Disabling the Customized Menu
When the Customized menu is enabled, the following changes can be made.
• Hide specified menu items from the FUNC key menu.
• Hide specified Setting mode menu items.
• Lock Basic Setting mode.
Basic Setting mode cannot be entered when recording is in progress.
Procedure
Enabling the Customized Menu
1. Hold down the
MENU
key for 3 seconds to enter Setting mode.
2. Hold down the and keys simultaneously for 3 seconds to display the
Basic Setting mode screen.
3. Carry out the procedure shown in the figure below.
Press the
or key to select the value.
For the procedure on how to enter values or characters, see page 19 in the
Operation Guide
.
If you press the key, the operation is cancelled, and the display returns to a
higher level menu.
(Displays the following when the
customized menu is set to USE)
Set the password.
Select whether to enable (USE) the
customized menu.
Select “CUST.M.”
(CUST.M)
(USE)
(****)
(P_ADJ)
(ON)
The settings are activated.
(OK)
Password
Select whether to use pen/dot printing
position adjustment without the
password. Select ON or OFF.
4. If you are done, press the key.
5. To return to the Operation mode,
1. Press the
key, use the or key to select , and press the
key.
2. Press the
or key to select or , and press the
key.
To Next Page
Loading...
Need help?
General
