4-19
IM 04P03B01-01E
Setup Operations for Changing/Adding Functions (Basic Setting Mode)
4
4.14 Changing the Print/Display Format of the Date
The format of the printout and display of the year, month, and day can be changed.
Basic Setting mode cannot be entered when recording is in progress.
Procedure
1. Hold down the
MENU
key for 3 seconds to enter Setting mode.
2. Hold down the and keys simultaneously for 3 seconds to display the
Basic Setting mode screen.
3. Carry out the procedure shown in the figure below.
Press the
or key to select the value.
If you press the key, the operation is cancelled, and the display returns to a
higher level menu.
The settings are activated.
Select the date format.
Select “DATE.”
(DATE)
(YMD)
(OK)
4. If you are done, press the key.
5. To return to the Operation mode,
1. Press the key, use the or key to select , and press the
key.
2. Press the or key to select or , and press the
key.
Explanation
Type
Selectable Type Printout Format Display Format Notes
Settings Example Example
Y/M/D 2006/03/31 06 03 31 Default value
M/D/Y 03/31/2006 03 31 06
D/M/Y 31/03/2006 31 03 06
D.M.Y 31.03.2006 31 03 06
M.D.Y Mar.31.2006 03 31 06
To Next Page
Loading...
Need help?
General
