4-33
IM 04P03B01-01E
Setup Operations for Changing/Adding Functions (Basic Setting Mode)
4
Explanation
Enable (
): Locks Basic Setting mode and hides the specified menu items in
Setting mode and FUNC key menu items.
Disable ( ): Releases Basic Setting mode and shows the all menu items in Setting
mode and all FUNC key menu items.
Password
This is the password used to release the customized menu or to enter Basic Setting
mode. Set the password using a four-digit number.
Note
Changing the Settings without Releasing the Basic Setting Mode Lock
The settings in Basic Setting mode can be changed without releasing the customized menu.
Procedure
1. Enter the password in the same manner as described in “Releasing the Customized Menu,”
and press the key. Enter Basic Setting mode.
2. Change the settings in the same manner as the normal procedure.
3. Return to Operation mode with the customized menu enabled.
<Related Topics> Selecting to show/hide the FUNC key menus: Section 4.19
Selecting to show/hide setting mode menus: Section 4.20
Adjusting the pen/dot position: Sections 6.4 and 6.5
4.21 Enabling/Disabling the Customized Menu
To Next Page
Loading...
Need help?
General
