5-37
IM 760301-01E
5
Power Measurement
Explanation
For functional details, see section 2.6.
To perform integration, the integration mode and integration time must be set before
starting the operation.
• Selecting the Integration Mode and Setting the Integration Timer
If the integration mode is set to normal integration and the integration timer is set to
00000:00:00, the integration is performed in manual integration mode.
For a description of starting, stopping, and resetting the integration and other items, see
section 5.11.
Note
Integration cannot be started, stopped, or reset in measurement modes other than normal
measurement mode.
5.12 Setting the Manual Integration
To Next Page
Loading...
Need help?
General
