YOKOGAWA wt3000 User Manual

8-8 IM 760301-01E
• Checking the Maximum Store Count and Optimizing the Store Count
5. Press the Optimize Store Count soft key. The Optimize Store Count dialog box
appears, and the maximum store count is displayed.
If the store count specified in step 4 is greater than the maximum store count, proceed
to step 6. Otherwise, proceed to step 12.
6. Press the cursor keys to select Maximum Store Count.
7. Press SET to display the entry box.
8. Press the cursor keys to set the store count to a value less than or equal to the
maximum store count.
9. Press SET or ESC to close the box.
10. Press the cursor keys to select SET.
11. Press SET.
12. Press ESC to close the entry box.
• Setting the Store Interval
4. Press the Interval Setting soft key to display the Interval Setting dialog box.
5. Press the cursor keys to select the hour, minute, or second box.
6. Press SET to display the entry box.
7. Press the cursor keys to set the hour, minute, or second that you selected in
step 5.
For the procedures on how to enter values using the cursor keys, see section 3.14,
“Entering Values and Strings.”
8. Press SET or ESC to close the box.
9. Repeat steps 5 to 8 to set the hour, minute, and second.
8.3 Setting the Store Count, Store Interval, Store Reservation Time, and Alert Indication of Internal Memory
Initialization

YOKOGAWA wt3000 Specifications

General

Frequency Range	DC, 0.1 Hz to 1 MHz
Number of Input Elements	Up to 4 elements
Harmonic Measurement	Up to 500th order
Interfaces	USB, Ethernet, RS-232
Sampling Rate	2 MS/s
Voltage Range	1.5 V to 1000 V
Display	8.4-inch LCD