YOKOGAWA wt3000 User Manual

App-14 IM 760301-01E
VOffset 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00
VDataType FS4 FS4 FS4 FS4
VUnit V A V A
VPlusOverData ? ? ? ?
VMinusOverData ? ? ? ?
VIllegalData ? ? ? ?
VMaxData 3.000000e+03 1.500000e+01 3.000000e+03 1.500000e+01
VMinData -3.000000e+03 -1.500000e+01 -3.000000e+03 -1.500000e+01
HResolution 2.0000000E-05 2.0000000E-05 2.0000000E-05 2.0000000E-05
HOffset 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00
HUnit sec sec sec sec
Date 2001/06/30 2001/06/30 2001/06/30 2001/06/30
Time 07:03:03 07:03:03 07:03:03 07:03:03
$Group3
TraceNumber 2
BlockNumber 1
TraceName Speed Torque
BlockSize 1002 1002
VResolution 1.0000000E+00 1.0000000E+00
VOffset 0.0000000E+00 0.0000000E+00
VDataType FS4 FS4
VUnit rpm Nm
VPlusOverData ? ?
VMinusOverData ? ?
VIllegalData ? ?
VMaxData 2.000000e+01 2.000000e+01
VMinData -2.000000e+01 -2.000000e+01
HResolution 2.0000000E-05 2.0000000E-05
HOffset 0.0000000E+00 0.0000000E+00
HUnit sec sec
Date 2001/08/30 2001/08/30
Time 07:03:03 07:03:03
$PrivateInfo
ModelVersion 1.01
(Note) The header file is a common file used by YOKOGAWA’s measuring instruments. Therefore, data
that is not required by the WT3000 (0s) is also included.
Appendix 3 ASCII Header File Format

YOKOGAWA wt3000 Specifications

General

Frequency Range	DC, 0.1 Hz to 1 MHz
Number of Input Elements	Up to 4 elements
Harmonic Measurement	Up to 500th order
Interfaces	USB, Ethernet, RS-232
Sampling Rate	2 MS/s
Voltage Range	1.5 V to 1000 V
Display	8.4-inch LCD