Accessories
111
1-Slot USB/Ethernet Cradle Setup
The 1-Slot USB/Ethernet Cradle provides device charging and communication.
Ethernet Communication
Establishing Ethernet Connection
1. Go to Settings.
2. Touch Network & internet > Ethernet.
3. Slide the Ethernet switch to the ON position.
4. Insert the device into a slot.
The icon appears in the Status bar.
5. Touch Eth0 to view Ethernet connection details.
Ethernet Settings
The following settings can be configured when using Ethernet communication:
1 DC line cord
2 Power supply
3 AC Line cord
4 RJ-45 port
5USB-C port
6 DC power port
7 USB-C connector
8 USB A connector
9 Ethernet cable
To Next Page
Loading...