Calls
97
To end a call using the wired headset, press and hold the headset button until the call ends.
Adjusting Audio Volume
• Use the volume buttons to adjust the phone volume.
• Ring and notification volumes when not in a call.
• Conversation volume during a call.
Making a Call Using the Dialer
Use the dialer tab to dial phone numbers.
1. On the Home screen touch .
2. Touch .
3. Touch the keys to enter the phone number.
4. Touch below the dialer to initiate the call.
• - Send audio to the speakerphone.
• - Mute the call.
• - Display the dial pad.
• - Place the call on hold (not available on all services).
• - Create a conference call.
• - Increase audio level.
5. Touch to end the call.
If using a Bluetooth headset, additional audio options are available. Touch the audio icon to open the audio
menu.
• - Audio is routed to the Bluetooth headset.
• - Audio is routed to the speakerphone.
• - Audio is routed to the earpiece.
Accessing Dialing Options
The dialer provides options to save the dialed number to contacts, send an SMS, or insert pauses and wait
into the dial string.
• Enter at least one digit in the dialer, then touch .
• Add 2–sec pause - Pause the dialing of the next number for two seconds. Multiple pauses are
added sequentially.
• Add wait - Wait for confirmation to send the rest of the digits.
Making a Call Using Contacts
There are two ways to make a call using contacts:
• Using the Dialer
To Next Page
Loading...
Need help?
General
