Zebra EC50 Product Reference Guide

Accessories
116
2. Ensure the device is seated properly.
Removing the Insert from the Cup
Each cradle cup has an insert that must be removed prior to inserting a device with a rugged boot or
extended battery. Remove the insert and then insert the device into the cup.
Figure 17 Remove Insert from Cup

Zebra EC50 Specifications

General

Suitable for	Barcode reader battery
Network ready	Yes
Power source type	DC
Brand compatibility	Zebra
Compatible products	EC50/EC55
Number of batteries supported	1
Compatible battery technologies	-
Product color	Black
Housing material	Plastic
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85044055