Zebra EC50 - Getting Started; Unpacking the Device; Device Features

19
Getting Started
This section provides information to get the device up and running for the first time.
Unpacking the Device
To unpack the device:
1. Carefully remove all protective material from the device, and save the shipping container for later
storage and shipping.
2. Verify that the following items were received:
• Touch computer
• Regulatory Guide.
3. Inspect the equipment for damage. If any equipment is missing or damaged, contact the Customer
Support center immediately. See Service Information.
4. Before using the device for the first time, remove the protective shipping film that covers the exit
window, touch screen, and rear camera.
Device Features
Figure 1 Front View
1
2
4
3
5
6
7
9
10
11
8