Zebra EC50 Product Reference Guide

Accessories
135
Rugged Boot
The Rugged Boot provides additional protection for the device.
Installation
To install the Rugged Boot:
1. Remove the rubber insert from plastic shell.
2. Insert the bottom of the device into the bottom of the boot.
3. Lift the top of the Rugged Boot over the top of the device.
4. Insert the bottom of the device with rubber insert into the bottom of the plastic shell.



Zebra EC50 Specifications

General

Suitable for	Barcode reader battery
Network ready	Yes
Power source type	DC
Brand compatibility	Zebra
Compatible products	EC50/EC55
Number of batteries supported	1
Compatible battery technologies	-
Product color	Black
Housing material	Plastic
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85044055