Zebra EC50 Product Reference Guide

Accessories
147
2.
Secure the mount to the holder with four M4 screws as shown.
Installing on the Windshield
To install the vehicle holder on the windshield:
1. Fix the suction cup mount to the selected area with the suction lever facing up.
2. Push the lever towards the base to create a vacuum between the suction cup and the windshield.
3. Make sure that the suction bond is strong enough before installing the device.

Zebra EC50 Specifications

General

Suitable for	Barcode reader battery
Network ready	Yes
Power source type	DC
Brand compatibility	Zebra
Compatible products	EC50/EC55
Number of batteries supported	1
Compatible battery technologies	-
Product color	Black
Housing material	Plastic
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85044055