Zebra EC50 Product Reference Guide

Getting Started
23
3.
Insert or replace the microSD card into the SD/SIM card drawer.
4. Insert the SD/SIM card drawer into the device.
5. Press the SD/SIM card drawer into the device to ensure it is in securely.
Installing or Replacing the SIM Card
NOTE: Only use a nano SIM card. EC55 only.
CAUTION: For proper electrostatic discharge (ESD) precautions to avoid damaging the SIM card. Proper
ESD precautions include, but not limited to, working on an ESD mat and ensuring that the user is properly
grounded.
1. Using your fingernail or a plastic tool, pull out the SD/SIM card drawer.
1 Fingernail or plastic tool access to SD/SIM card drawer
1

Zebra EC50 Specifications

General

Suitable for	Barcode reader battery
Network ready	Yes
Power source type	DC
Brand compatibility	Zebra
Compatible products	EC50/EC55
Number of batteries supported	1
Compatible battery technologies	-
Product color	Black
Housing material	Plastic
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85044055