Zebra EC50 Product Reference Guide

Accessories
148
Installing the Dash Mount
To install the cradle on the dashboard:
1. Install the disc using the instructions provided with the disc.
2. Remove protective plastic from top of disc.
3. Fix the suction cup mount to the disc with the suction lever facing you.
4. Push the lever towards the base to create a vacuum between the suction cup and the disc.
5. Make sure that the suction bond is strong enough before installing the device.
Installing the Device
To install the device into the vehicle holder:
NOTE: The vehicle holder accommodates the device with or without the Boot.
Do not leave the device in direct sunlight for a long period of time as it may cause the device to exceed
proper operating temperature.
1. Place one side of device into the vehicle holder and push to expand the holder.

Zebra EC50 Specifications

General

Suitable for	Barcode reader battery
Network ready	Yes
Power source type	DC
Brand compatibility	Zebra
Compatible products	EC50/EC55
Number of batteries supported	1
Compatible battery technologies	-
Product color	Black
Housing material	Plastic
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85044055