Zebra EC50 Product Reference Guide

Accessories
150
5-Slot Cradle Rack Installation
NOTE: 5-Slot Ethernet Cradle Only
Use the Rack/Wall Mount Bracket to mount a 5-slot cradle on a rack. When installing on a rack, first
assemble the bracket and cradles/chargers and then install the assembly on the rack.
NOTE: Ensure tie wrap buckle is on side of power supply. Tie wrap buckle on top of power supply
interferes with top tray.
1. Place the power supply in bottom tray.
2. Connect AC line cord to power supply.
3. Connect DC line cord to power supply.
4. Secure power supply and cables to bottom tray with tie wraps.
5. Route cables through cable slots.
1 DC line cord
2 Power supply
3 AC line cord


Zebra EC50 Specifications

General

Suitable for	Barcode reader battery
Network ready	Yes
Power source type	DC
Brand compatibility	Zebra
Compatible products	EC50/EC55
Number of batteries supported	1
Compatible battery technologies	-
Product color	Black
Housing material	Plastic
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85044055