Zebra EC50 Product Reference Guide

Data Capture
68
3.
Press and hold the trigger.
The red laser aiming pattern turns on to assist in aiming. Ensure the barcode is within the area formed
by the cross-hairs in the aiming pattern. The aiming dot increases visibility in bright lighting conditions.
The RS6000 LEDs light green and a beep sounds to indicate the barcode was decoded successfully.
When the RS6000 is in Pick List mode, the RS6000 does not decode the barcode until the center of the
crosshair touches the barcode.
4. The captured data appears in the text field.

Zebra EC50 Specifications

General

Suitable for	Barcode reader battery
Network ready	Yes
Power source type	DC
Brand compatibility	Zebra
Compatible products	EC50/EC55
Number of batteries supported	1
Compatible battery technologies	-
Product color	Black
Housing material	Plastic
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85044055