Data Capture
132
Figure 89 Hands Free Trigger Settings
Scanning Mode
Use the Scanning Mode settings to configure how the device functions while in hands free scanning mode.
Figure 90 Scanning Mode Dialog Box
• Hands Free in Cart/Mount - Select to enable scanning when the device is in the cart/mount. The device
detects the difference between in-motion and stationary states. When the device is in the Motion state,
proximity scanning is disabled. When the device is in the Stationary state or in a hands free cart/mount,
proximity scanning is enabled.
• Hands Free Always On - Select to place the device in hands free scanning mode.
• Hands Free Off - Select to disable hands free scanning mode (default).
NOTE: In order to use the Hands Free in Cart/Mount scanning mode, the devices in a store must be calibrated to the
cart orientation first. If the hands free scanning mode is enabled, and if the device is properly calibrated, the device will be
detected that it’s in a cart and enable the hands free trigger. While in the cart, the device displays a shopping cart notification
in the status bar. For more information about creating and deploying the calibration file, see the PS20 Personal Shopper
Calibration App User Guide at
zebra.com/ps20-info.
Proximity Range
To configure the proximity sensor range sensitivity, touch Proximity Trigger Range.
To Next Page
Loading...
Need help?
General
