Zebra PS20 Series User Manual

Applications
95
• Automatically programming Wall/Row/Column/Current once it has detected it moved to the proper next slot.
• Signaling when ready to move to the next slot (audible chime to indicate programming was successful).
Accessing CradleSmartConfig
To access CradleSmartConfig:
1. Go to the Zebra Support & Downloads web site for the PS20, zebra.com/ps20-info
.
2. Download CradleSmartConfig to a host computer.
3. Use the sideload process to copy the CradleSmartConfig.apk file onto a single PS20 device.
4. Install the app.
Using CradleSmartConfig
To configure the cradle wall using CradleSmartConfig:
1. Swipe up from the bottom of the Home screen and touch CradleSmartConfig .
The CradleSmartConfig screen displays.
Figure 54 CradleSmartConfig Screen
2. Complete the following:
• Rows - The cradle row number in the dispenser wall.
• Columns - The column number in the dispenser wall.
• Wall ID - The number of dispenser wall where the cradle is positioned.
• Fast Charge - Touch to enable the cradle to charge the PS20 at a current of 1.5A (default setting is 1A).
NOTE: This app is not pre-loaded on the device and must be downloaded and installed prior to use.
NOTE: Prior to using CradleSmartConfig, all new cradles should be mounted to a wall, including all power con-
nections. It is assumed that no programming has occured and all cradles are functioning with a unique serial num-
ber programmed in them from the factory.

Zebra PS20 Series Specifications

General

Brand	Zebra
Model	PS20 Series
Category	Handhelds
Language	English