Getting Started
28
Replacing the Battery
To replace the battery:
1. Touch and hold the soft power button until the menu appears.
2. Touch Power Off.
3. Touch OK.
CAUTION: The PS20 must be off before removing the battery. Failing to turn off the PS20 before removing the battery may
damage the data stored on flash memory or corrupt the operating system files.
4. Loosen the captive screw that secures the battery cover, using a Phillips (PH00)screwdriver.
5. Lift the battery cover from the handle.
6. Inside the battery compartment, press down the plastic tab of the battery cable connector and slide it out of
the shrouded male pin connector.
7. Remove the battery from the battery compartment.
Figure 7 Remove the Battery
8. With the replacement battery, guide and press the battery cable connector into the shrouded male pin
connector inside the battery compartment. The connector is designed to only fit one way.
9. Place the battery inside the battery compartment.
10.Place the battery cover onto the handle.
11.Secure the battery cover with the screw, using a Phillips (
PH00)screwdriver.
Press down plastic tab to release
To Next Page
Loading...
Need help?
General
