EasyManua.ls Logo

Zebra PS20 Series - Cleaning Materials Required; Cleaning Frequency; Cleaning the Device

Zebra PS20 Series
259 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Applications
80
Battery level - The current battery charge level as a percentage. Displays -% when level is unknown.
Time until full - The amount of time until the battery is fully charged.
Time since charging - The amount of time since the device began charging.
Time until empty - The amount of time until the battery is empty.
Battery status
Not charging - The device is not connected to AC power.
Charging over AC - The device is connected to AC power and charging.
Charging over USB - The device is connected to a host computer with a USB cable and charging.
Discharging - That the battery is discharging.
Full - That the battery is fully charged.
Unknown - The battery status is unknown.
Battery health - The health of the battery. If a critical error occurs, appears. Touch to view the error
description.
Decommission - The battery is past its useful life and should be replaced. See system administrator.
Good - The battery is good.
Charge error - An error occurred while charging. See system administrator.
Over Current - An over-current condition occurred. See system administrator.
Dead - The battery has no charge. Replace the battery.
Over Voltage - An over-voltage condition occurred. See system administrator.
Below Temperature - The battery temperature is below the operating temperature. See system
administrator.
Failure Detected - A failure has been detected in the battery. See system administrator.
Unknown - See system administrator.
Wear level - The health of the battery in graphical form. When the wear level exceeds 80%, the bar color
changes to red.
Table 15 Battery Icon Description
Battery
Icon
Description
Battery charge level.
Battery charging.
Battery charge level is below 20%.

Table of Contents

Related product manuals