Zebra ZXP 7 series Service Manual

P1036102-007 ZXP Series 7 Card Printer Service Manual 65
Replacement Procedures for the Printer
Procedures: Belt and Gear Panel
Plunger and Spring Assemblies
Step 1. Press each Plunger in, and rotate it counterclockwise. This will free the
assembly.
Step 2. Set the Plungers and associated Springs aside.

Zebra ZXP 7 series Specifications

General

Print Resolution	300 dpi
Connectivity	USB 2.0, Ethernet
Memory	64 MB standard
Print Technology	Dye-sublimation thermal transfer
Card Capacity	200 cards input hopper, 100 cards output hopper
Card Sizes	CR-80 ISO 7810, 2.12" (54 mm) x 3.38" (86 mm)
Power Requirements	100-240 VAC, 50-60 Hz