Chapter 20 Syslog
N4100 User’s Guide
171
The following table describes the labels in this screen.
The following table describes the syslog formats.
Table 38 ADVANCED > SYSLOG > Log Settings
LABEL DESCRIPTION
Syslog Select this check box to send this log information to your syslog server.
Email Select this check box to send log information to the e-mail address
specified in the Syslog screen.
Syslog Name This field displays the name (or type) of the syslog. Select the check
box(es) to send the syslog.
Description This field displays a short description about the syslog.
Interval Time This field displays how often the N4100 sends the syslog. If available,
enter the number of minutes the N4100 waits between sending the
syslog.
Apply Click Apply to save your changes back to the N4100.
Table 39 Log Formats
SYSLOG NAME FORMAT CREATED
System
Information
Id <MAC Address> System Uptime <0 days
00h:04m:00s> Location Name <Location
Name> WAN <FrameTxOK| FrameRxOK|
FrameTxError| FrameRxError> LAN <FrameTxOK|
FrameRxOK| FrameTxError| FrameRxError>
Wireless <FrameTxOK| FrameRxOK|
FrameTxError| FrameRxError>
Each time interval
specified (between
1 and 10080
minutes).
System Boot
Notice
Id <MAC Address> System Up Each time the
device reboots,
when system
reboot
System Manager
Activity
Information
Id <MAC Address> System Account Activity
Information <Username, User IP, Status>
Where:
Username = Administrator | Supervisor |
Accounting Operator
User IP = IP Address
Status = Login | Logout | Idle Time Out
Each time when a
system manager
logs in or logs out.
Wireless
Association
Information
Id <MAC Address> Wireless Association
Information <Number of associated users, Start
Number, End number) (Signal strength, Signal
quality, Connection speed, MAC
address>(…)(…)(…)
Each time interval
specified (between
1 and 10080
minutes).