ZyXEL Communications N4100 User Manual

Chapter 24 Bandwidth
N4100 User’s Guide
188
24.2 The Bandwidth Screen
Click ADVANCED > BANDWIDTH to open this screen.
Figure 91 ADVANCED > BANDWIDTH
The following table describes the fields in this screen.
Table 47 ADVANCED > BANDWIDTH
LABEL DESCRIPTION
Bandwidth
Management
Select Enable to turn on bandwidth management. If you select
Disable, each user gets as much bandwidth as possible until the
available bandwidth is gone.
Maximum
Upstream
Select the maximum amount of upstream (outbound) bandwidth or
enter a specific amount of bandwidth in Kbps that any user can have.
Maximum
Downstream
Select the maximum amount of downstream (inbound) bandwidth or
enter a specific amount of bandwidth in Kbps that any user can have.
Apply Click this button to save your changes back to the N4100.

ZyXEL Communications N4100 Specifications

General

Number of users	100 user(s)
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	100 Mbit/s
Indoor range	35 ~ 100 m
Outdoor range	100 ~ 300 m
Connectivity LEDs	Yes
Internal	No
Certification	FCC, CE, C-Tick, NCC, RoHS, WEEE
Security algorithms	802.1x RADIUS
Power requirements	100-240 VAC, 50/60 Hz, 0.5 A
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Weight	565 g
Dimensions (WxDxH)	222 x 146 x 152 mm