ZyXEL Communications N4100 User Manual

N4100 User’s Guide
35
CHAPTER 3
Tutorials
3.1 Overview
This chapter describes:
• how to set up a wireless network (Section 3.2 on page 35).
• how to generate a subscriber account (Section 3.3 on page 38).
• how to log in as a subscriber (Section 3.4 on page 42).
• how to print reports using SP300E (Section 3.5 on page 42).
• how to access the N4100 using DDNS (Section 3.6 on page 49).
• how to remotely access or manage the device behind the N4100 (Section 3.7 on
page 51)
• how to set up and enable SSL security on the N4100 (Section 3.8 on page 52)
Note: The tutorials featured in this chapter require a basic understanding of
connecting to and using the Web Configurator on your N4100. For details, see
the included Quick Start Guide. For field descriptions of individual screens, see
the related technical reference in this User's Guide.
3.2 Wireless Network Setup
The N4100 is connected to a broadband modem with Internet access. Thomas
wants to set up a wireless network so that the users can use their notebooks or
computers to wirelessly access the Internet through the N4100. In this wireless
network, the N4100 serves as an access point (AP), and the notebook with a
wireless network card or USB/PCI adapter is the wireless client. The wireless client
can access the Internet through the AP.

ZyXEL Communications N4100 Specifications

General

Number of users	100 user(s)
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	100 Mbit/s
Indoor range	35 ~ 100 m
Outdoor range	100 ~ 300 m
Connectivity LEDs	Yes
Internal	No
Certification	FCC, CE, C-Tick, NCC, RoHS, WEEE
Security algorithms	802.1x RADIUS
Power requirements	100-240 VAC, 50/60 Hz, 0.5 A
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Weight	565 g
Dimensions (WxDxH)	222 x 146 x 152 mm