ZyXEL Communications N4100 User Manual

Chapter 28 System Status
N4100 User’s Guide
223
28.8 The LAN Devices Screen
The SYSTEM STATUS > LAN DEVICES screen displays the status of LAN devices
configured in the ADVANCED > LAN DEVICES screen (refer to Chapter 19 on
page 163).
Click SYSTEM STATUS > LAN DEVICES to open this screen. This screen
automatically updates every minute.
Figure 103 SYSTEM STATUS > LAN DEVICES
The following table describes the labels in this screen.
Remote Port This field displays the port number of a remote device the client
computer accesses.
Idle This field displays how many seconds are left before the session times
out if there is no more traffic. The N4100 automatically times out idle TCP
sessions after 5 minutes (300 seconds). The N4100 automatically times
out idle UDP sessions after 1 minute (60 seconds).
Table 59 SYSTEM STATUS > SESSION LIST (continued)
LABEL DESCRIPTION
Table 60 SYSTEM STATUS > LAN DEVICES
LABEL DESCRIPTION
NO. This field displays the index number.
Device Name This field displays the name of the LAN device. Click the device name to
access the LAN device if the Status field is OK.
Status This field displays the current status of the LAN device. It displays OK
when the LAN device is turned on and working properly. Otherwise it
displays FAIL.
Virtual Port
(60001-
60050)
This field displays the virtual port number.
Device IP
Address
This field displays the IP address of the LAN device.

ZyXEL Communications N4100 Specifications

General

Number of users	100 user(s)
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	100 Mbit/s
Indoor range	35 ~ 100 m
Outdoor range	100 ~ 300 m
Connectivity LEDs	Yes
Internal	No
Certification	FCC, CE, C-Tick, NCC, RoHS, WEEE
Security algorithms	802.1x RADIUS
Power requirements	100-240 VAC, 50/60 Hz, 0.5 A
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Weight	565 g
Dimensions (WxDxH)	222 x 146 x 152 mm