Chapter 29 Configuration and Firmware
N4100 User’s Guide
236
2 Specify the name of the boot code file in the Local PC File Path field or click
Browse to locate the file and click Apply to start the file transfer process. The
boot code must be a binary file and should have a .rom extension.
3 When the file transfer is completed successfully, a restart message displays and
the N4100 automatically restarts.
WARNING!
Do not interrupt the file upload process as this may
PERMANENTLY damage the device.
Figure 117 System Restart
4 After the N4100 finishes restarting, access the web configurator again. Check the
Boot ROM version number in the System Quick View screen.
Note: When the N4100 restarts, all connections terminate. Subscribers need to log in
again.
29.3.4 Scheduled Firmware Upgrade
Click SYSTEM TOOLS > FIRMWARE > Scheduled Firmware Upgrade to
display the screen as shown.
Configure the screen to automatically download the latest firmware from a TFTP
server.
Note: Make sure that the TFTP server has the firmware and synchronization check
file before you configure for scheduled firmware upgrades.
Make sure that you check new features or functionality enhancements in new
firmware releases before you put the firmware on the TFTP server.
To Next Page
Loading...
