ZyXEL Communications N4100 - Keypad with Post-Paid Billing Example

Chapter 12 Keypad
N4100 User’s Guide
117
12.3.2 Keypad with Post-Paid Billing Example
The following is an example of how to configure the N4100 to use a PS/2 keypad
for post-paid billing.
1 Click ADVANCED > BILLING.
2 Select Post-Paid and click Apply.
Figure 47 Select Post-Paid Billing
3 Click ADVANCED > KEYPAD.
4 Define your post-paid billing plan and click Apply.
Figure 48 Define Post-Paid Billing Plan