Chapter 29 Configuration and Firmware
N4100 User’s Guide
230
1 Click SYSTEM TOOLS > CONFIGURATION. A screen displays as shown next.
Figure 109 SYSTEM TOOLS > CONFIGURATION: Restore Using HTTP
2 Specify the location and filename of a configuration file in the Local PC File Path
field or click Browse.
3 Click Apply to start the configuration restore process. The N4100 automatically
restarts after the restoration process is complete.
29.2.4 Restore Configuration Using TFTP
This section shows you how to upload a new or previously saved configuration file
from a TFTP server to your N4100.
Note: This function erases the current configuration before restoring a previous back
up configuration; please do not attempt to restore unless you have a backup
configuration file stored on disk.
To Next Page
Loading...
