ZyXEL Communications N4100 User Manual

N4100 User’s Guide
143
CHAPTER 14
Pass Through
14.1 Overview
You can set up two types of pass through on the N4100: by device or by web site
address.
You can set the N4100 to allow specific computers on the LAN (based on the IP or
MAC address) to access the Internet without prompting for a user name and
password. This feature is useful, for example, if you want to set up computers to
provide free Internet access in the VIP room or for sponsors in events.
To allow global access to web sites, specify the web site address (by IP address or
URL) that any user can access without logging in. This is similar to the walled
garden feature, but without displaying the web site link(s) in the subscriber login
screen. You have to inform the users about which web sites they can access for
free.
14.1.1 What You Can Do in this Chapter
Use the Pass Through screen (Section 13.2 on page 120) to specify devices that
can have traffic pass through the N4100.
14.2 The Pass Through Screen
Click ADVANCED > PASS THROUGH to open this screen.

ZyXEL Communications N4100 Specifications

General

Number of users	100 user(s)
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	100 Mbit/s
Indoor range	35 ~ 100 m
Outdoor range	100 ~ 300 m
Connectivity LEDs	Yes
Internal	No
Certification	FCC, CE, C-Tick, NCC, RoHS, WEEE
Security algorithms	802.1x RADIUS
Power requirements	100-240 VAC, 50/60 Hz, 0.5 A
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Weight	565 g
Dimensions (WxDxH)	222 x 146 x 152 mm