ZyXEL Communications N4100 - Page 173

Chapter 20 Syslog
N4100 User’s Guide
173
Billing Log Id <Mac Address> Billing Log <, Type, S/N,
Username, Billing profile information, Units, Usage
time, Bill, Payment>
Where:
Type: TimeToFinish | Accumulation | PostPaid
Billing profile name: [Name]
Usage time: “00:59:59” (example)
Billing profile information = index, name
Payment: Cash | Credit Card
“Credit Card” does not support “PostPaid”.
If Type is “PostPaid”, the billing profile information
and Units will be “*”.
When a billing log
is created
LAN Devices
Information
Id <MAC Address> LAN Devices Information
<Number of devices, Start Number, End number>
Device name <status> [additional information]
Each time interval
specified (between
1 and 10080
minutes).
LAN Devices
Alarm
Id <MAC Address> LAN Device Alarm <Device
name, FAIL>
When the N4100
cannot connect to
an attached LAN
device.
Table 40 Subscriber Trace Relationship
TYPE EVENT TIME LEFT
TimeToFinish Finished 00:00:00
TimeToFinish Replenished 00:12:00 to S/Nxxxxxx
TimeToFinish Deleted 00:12:00
Accumulation Finished 00:00:00
Accumulation Replenished 00:12:00 to S/Nxxxxxx
Accumulation Logout 00:48:00
Accumulation Idle-Timeout 00:48:00
Accumulation Deleted 00:48:00
Accumulation Account Expired 00:48:00
PostPaid Logout ******
PostPaid Idle-Timeout ******
PostPaid Deleted ******
PostPaid Finished ******
PostPaid Account Expired ******
Table 39 Log Formats (continued)
SYSLOG NAME FORMAT CREATED