Chapter 22 Secure Remote
N4100 User’s Guide
182
The following table describes the labels in this screen.
Table 43 ADVANCED > SECURE REMOTE
LABEL DESCRIPTION
Secure
Remote
Select Enable to have the N4100 send RADIUS packets, syslogs and log
e-mails through a PPTP VPN tunnel.
Auto-connect
at Start-up
(Always
connect)
Turn this on to have the N4100 automatically establish this connection
after it turns on.
PPTP Server IP
address
Enter the IP address of the PPTP server to which the N4100 will make the
secure connection.
Username Enter the user name exactly as it was provided by the ISP or network
administrator. The user name can be up to 80 alphanumeric characters
and is case-sensitive.
Password Enter the password exactly as it was provided by the ISP or network
administrator. The password can be up to 80 alphanumeric characters
and is case-sensitive.
Start/Stop
Connection
Click this button to initiate or cancel the PPTP connection.
Status
VPN Tunnel This field displays whether or not the PPTP connection is currently up.
Client IP This is the IP address that the PPTP server assigned to the N4100 for the
VPN connection.
Apply Click Apply to save your changes back to the N4100.
To Next Page
Loading...
